ulab utilities

There might be cases, when the format of your data does not conform to ulab, i.e., there is no obvious way to map the data to any of the five supported dtypes. A trivial example is an ADC or microphone signal with 32-bit resolution. For such cases, ulab defines the utils module, which, at the moment, has four functions that are not numpy compatible, but which should ease interfacing ndarrays to peripheral devices.

The utils module can be enabled by setting the ULAB_HAS_UTILS_MODULE constant to 1 in ulab.h:

#ifndef ULAB_HAS_UTILS_MODULE
#define ULAB_HAS_UTILS_MODULE               (1)
#endif

This still does not compile any functions into the firmware. You can add a function by setting the corresponding pre-processor constant to 1. E.g.,

#ifndef ULAB_UTILS_HAS_FROM_INT16_BUFFER
#define ULAB_UTILS_HAS_FROM_INT16_BUFFER    (1)
#endif

from_int32_buffer, from_uint32_buffer

With the help of utils.from_int32_buffer, and utils.from_uint32_buffer, it is possible to convert 32-bit integer buffers to ndarrays of float type. These functions have a syntax similar to numpy.frombuffer; they support the count=-1, and offset=0 keyword arguments. However, in addition, they also accept out=None, and byteswap=False.

Here is an example without keyword arguments

# code to be run in micropython

from ulab import numpy as np
from ulab import utils

a = bytearray([1, 1, 0, 0, 0, 0, 0, 255])
print('a: ', a)
print()
print('unsigned integers: ', utils.from_uint32_buffer(a))

b = bytearray([1, 1, 0, 0, 0, 0, 0, 255])
print('\nb:  ', b)
print()
print('signed integers: ', utils.from_int32_buffer(b))

a:  bytearray(b'x01x01x00x00x00x00x00xff')

unsigned integers:  array([257.0, 4278190080.000001], dtype=float64)

b:   bytearray(b'x01x01x00x00x00x00x00xff')

signed integers:  array([257.0, -16777216.0], dtype=float64)

The meaning of count, and offset is similar to that in numpy.frombuffer. count is the number of floats that will be converted, while offset would discard the first offset number of bytes from the buffer before the conversion.

In the example above, repeated calls to either of the functions returns a new ndarray. You can save RAM by supplying the out keyword argument with a pre-defined ndarray of sufficient size, in which case the results will be inserted into the ndarray. If the dtype of out is not float, a TypeError exception will be raised.

# code to be run in micropython

from ulab import numpy as np
from ulab import utils

a = np.array([1, 2], dtype=np.float)
b = bytearray([1, 0, 1, 0, 0, 1, 0, 1])
print('b: ', b)
utils.from_uint32_buffer(b, out=a)
print('a: ', a)

b:  bytearray(b'x01x00x01x00x00x01x00x01')
a:  array([65537.0, 16777472.0], dtype=float64)

Finally, since there is no guarantee that the endianness of a particular peripheral device supplying the buffer is the same as that of the microcontroller, from_(u)intbuffer allows a conversion via the byteswap keyword argument.

# code to be run in micropython

from ulab import numpy as np
from ulab import utils

a = bytearray([1, 0, 0, 0, 0, 0, 0, 1])
print('a: ', a)
print('buffer without byteswapping: ', utils.from_uint32_buffer(a))
print('buffer with byteswapping: ', utils.from_uint32_buffer(a, byteswap=True))

a:  bytearray(b'x01x00x00x00x00x00x00x01')
buffer without byteswapping:  array([1.0, 16777216.0], dtype=float64)
buffer with byteswapping:  array([16777216.0, 1.0], dtype=float64)

from_int16_buffer, from_uint16_buffer

These two functions are identical to utils.from_int32_buffer, and utils.from_uint32_buffer, with the exception that they convert 16-bit integers to floating point ndarrays.

# code to be run in CPython